CHONGQING GOHI MARINE EQUIPMENT CO., LTD.
Better Service, Better Cost Effective!
Add to Cart
Marine single drum or double drum towing winch are approved by CCS, BV, ABS, DNV-GL, LR, NK, RMRS, IRS, RINA etc
Towing winch is widely used in tugboat. Single drum, double drums are available.
For double drums, waterfall configuration is the normal selection. The lower drum is used for anchoring, the upper used for towing.
The nominal speed depend on working load of winch, larger load with slower speed.
Usually the speed is around 3-10m/min, the drum capacity is about 500-1500m.
Spooling device is optional.
Electric driven mode is used for smaller towing winch and hydraulic for big winch.
Local control stands and remote control panel are optional.
Emergency release system is required as per class rules..
The rope length and tension display and constant tension are available.
Braking force =working load*3
Bollard pull=HP/10=KN
Nominal pull=bollard pull*1.5
| Model | Drum Load (KN) | Nominal Speed (m/min) | Holding Load (KN) | Dia. Of Rope (mm) | Rope Capacity (m) |
| GH-30 | 30 | 15 | 90 | 16 | 150 |
| GH-40 | 40 | 15 | 120 | 18 | 150 |
| GH-50 | 50 | 15 | 150 | 20 | 180 |
| GH-75 | 75 | 15 | 220 | 26 | 180 |
| GH-80 | 80 | 15 | 240 | 26 | 200 |
| GH-100 | 100 | 15 | 300 | 28 | 200 |
| GH-125 | 125 | 15 | 310 | 30 | 200 |
| GH-150 | 150 | 15 | 450 | 32 | 250 |
| GH-160 | 160 | 15 | 470 | 32 | 250 |
| GH-200 | 200 | 9.6 | 590 | 40 | 250 |
| GH-250 | 250 | 9.6 | 730 | 44 | 250 |
| GH-315 | 315 | 7.8 | 940 | 52 | 250 |
| GH-350 | 350 | 7.8 | 1050 | 54 | 250 |
| GH-400 | 400 | 7.8 | 1050 | 56 | 250 |
Towing winches mainly used for oversize concrete construction of steel installation and disassembly of mechanical equipment. The wire rope ordered arrangement. Lifting is safe and reliable. It is suitable for bridge, factory, harbor, wharf etc. Gear reducer driving, Used for hoisting, pulling, drag, compact structure, stable running.
Advantages and main featrues:
1. Top quality with competitive price.
2. Widely used in factory, mining, shipyard or double beam cranes.
3. Compact structure and reasonable design.
4. Easy to install, operate and maintenance.
5. Low noise and good working condition.